SCC Flex-E-Guard 15KG
SCC SCC Flex-E-Guard 15KG is a two-part cementitious waterproofing system designed for areas that require flexibility and long-term protection. Unlike rigid waterproofing solutions that may crack under movement, Flex-E-Guard remains highly flexible, preventing water ingress even in high-stress areas.
- Highly Flexible & Crack-Resistant
Unlike traditional rigid waterproofing products, Flex-E-Guard moves with the substrate, ensuring that small shifts and cracks won’t compromise its waterproofing capabilities. - Durable & Long-Lasting
Engineered for durability, SCC Flex-E-Guard provides permanent waterproofing protection, making it ideal for high-traffic and high-moisture areas. - Potable Water Safe
Need to waterproof a fishpond, reservoir, or water feature? No problem! Flex-E-Guard is non-toxic and safe for potable water, making it perfect for waterproofing projects that involve water storage. - Easy to Apply
With its pre-measured two-part system, Flex-E-Guard is easy to mix and apply, ensuring a hassle-free waterproofing experience for DIYers and professionals alike.
Applying SCC Flex-E-Guard is straightforward, making it an excellent choice for both seasoned professionals and first-time DIYers.
Step 1: Prepare the Surface
– Clean the area thoroughly, removing dust, dirt, and loose debris.
– If the substrate is porous, dampen it slightly to improve adhesion.Step 2: Mix the Two-Part System
– Combine Part A (cementitious base) with Part B (liquid polymer) in the recommended ratio.
– Mix until smooth and lump-free.Step 3: Apply the First Coat
– Use a brush, roller, or trowel to apply the first coat.
– For high-stress areas (like joints and corners), embed a waterproofing membrane into the first coat for extra reinforcement.Step 4: Apply the Second Coat
– Allow the first coat to dry (approximately 4–6 hours).
– Apply the second coat in the opposite direction to ensure even coverage.Step 5: Allow to Cure
– Let SCC Flex-E-Guard fully cure before exposing it to moisture.
– For best results, wait 48 hours before applying any finishes, tiles, or coatings.DIY Tip: When waterproofing corners or joints, apply an extra layer of Flex-E-Guard for added protection
– Clean the area thoroughly, removing dust, dirt, and loose debris.
– If the substrate is porous, dampen it slightly to improve adhesion.Step 2: Mix the Two-Part System
– Combine Part A (cementitious base) with Part B (liquid polymer) in the recommended ratio.
– Mix until smooth and lump-free.Step 3: Apply the First Coat
– Use a brush, roller, or trowel to apply the first coat.
– For high-stress areas (like joints and corners), embed a waterproofing membrane into the first coat for extra reinforcement.Step 4: Apply the Second Coat
– Allow the first coat to dry (approximately 4–6 hours).
– Apply the second coat in the opposite direction to ensure even coverage.Step 5: Allow to Cure
– Let SCC Flex-E-Guard fully cure before exposing it to moisture.
– For best results, wait 48 hours before applying any finishes, tiles, or coatings.DIY Tip: When waterproofing corners or joints, apply an extra layer of Flex-E-Guard for added protection
| Weight | 17 kg |
|---|---|
| Dimensions | 45 × 45 × 45 cm |
Related products
Exterior Paint
Price range: R1,349.99 through R1,395.00
Price range: R65.00 through R329.99
Exterior Paint
R789.99
Paint & Waterproofing
R199.99
Exterior Paint
R1,099.99
Hardware
R1,049.99
Exterior Paint
R372.95
All products
R54.95
